Home/Industry News

IFR Reports US Robot Installations Grew 12% in 2025

IFR reports 38,400 US industrial robot installations in 2025, up 12%. Compare the June preliminary release with September figures and review sector differences.

CLOOS industrial robots pictured in the existing image gallery

CLOOS industrial robots from the existing gallery. Illustrative equipment photo, not a US installation site documented by IFR.

US robot installations reached 38,400 units in 2025, a 12% year-on-year increase, according to the International Federation of Robotics (IFR). Its US market release, published on September 24, 2026, says the United States passed Japan to become the second-largest market for industrial robots after China. The figures describe installations during 2025; 2026 is the publication year.

Read the original IFR US market release: U.S. now Second-Largest Robotics Market, Following China — September 24, 2026 (PDF)

Why do earlier reports show 11% growth?

IFR published preliminary results on June 18, 2026. That release reported about 38,000 installations and 11% growth for 2025. The September US release gives 38,400 installations and 12% growth. Both announcements concern the same year, so the publication date and data version matter when citing them. This article uses the later US-specific release.

US robot installations: preliminary and later releases
Release2025 installationsYear-on-year change
IFR preliminary release, June 18, 2026About 38,000Up 11%
IFR US market release, September 24, 202638,400Up 12%

The global overview published by IFR on the same September date describes the US figure as almost 38,500 units. To keep one consistent figure, this article uses the 38,400 stated in the US-specific release. Both sources are linked for comparison. These numbers are not full-year 2026 results, spare-part sales or repair orders.

Compare with the IFR preliminary US market release dated June 18, 2026

Growth differs across customer industries

The September US release identifies automotive as the largest customer industry, with 13,500 installations in 2025, down 1%. Metal and machinery recorded 3,000 installations, down 15%. Food and beverage installations rose 30% to 2,900. A growing national total can therefore coexist with declines in individual industries.

Selected customer industries in the IFR US release
Industry2025 installationsYear-on-year change
Automotive13,500Down 1%
Metal and machinery3,000Down 15%
Food and beverage2,900Up 30%

These are selected industries named in the release, not a complete breakdown of the US market. Adding the three rows does not give the national total. Installation growth also does not establish the order intake of a particular robot brand, integrator or repair provider.

Suntech equipment perspective: plan at cell level

The following points are editorial equipment-management suggestions. IFR measures installation activity; the release does not measure Suntech repair demand or the failure rate of an individual robot. For an installed production cell, useful robot maintenance starts with equipment identity, service records and agreed checks.

  • Equipment identity: retain the complete robot, controller, pendant and affected module models, versions and clear label photographs.
  • Fault records: separate the first alarm from later messages, and record timing, load, speed and peripheral equipment states.
  • Spare-part assessment: verify interfaces, versions and the applicable configuration. Similar housings or connectors do not establish compatibility.
  • Acceptance scope: agree checks for the actual production task, with separate results for robot motion, tooling and process equipment.

Automotive, metalworking and food cells use different tools and face different operating conditions. A welding cell needs torch and process-system records alongside motion checks. A food application needs the applicable hygiene and cleaning requirements checked. Market statistics provide context; the equipment manual and actual cell conditions determine the maintenance plan.

Related technical reading: industrial robotic arm repair, faults and component checks

Related technical reading: industrial robots in manufacturing and equipment service

Original sources and data checks

The news figures above come from public IFR releases associated with World Robotics 2026. Equipment-management suggestions are separately labelled as editorial analysis. Source dates are distinct from this website publication date, and the links below let readers check the figures in context.

IFR US market release, September 24, 2026 (PDF; main source for the figures)

IFR global overview: Five Million Robots now Operate in Factories Globally — September 24, 2026

Related report on this site: global industrial robot stock and installations

← All industry newsTechnical articles →
24-hour Robot Repair Hotline:+86 18122406596 (repair)